Micro 800 PLC + Signet 515 paddle wheel

metschke

Member
M
Join Date
Jul 2022
Location
KS
Posts
2
Has anyone been able to read the flow pulses from a Signet 515 paddle wheel on an Allen Bradley Micro 800 PLC with a high-speed counter input? I have tried everything I can think of and the controller is not able to read the pulses.
 
Last edited:

Similar Topics

M
Micro 800 PLC Reading Signet 515 Paddlewheel Frequency Input
I am working on a Micro 820 with a 2080-MOT-HSC high speed counter module. I am trying to read the pulses from a Signet 515 paddle wheel flow...
Replies
0
Views
714
metschke
M
L
PLC scan in the Micro 800 serie
I have found a information in the user manuel of the CCW software, it's about the use of MODBUS TCP instruction : "A maximum of four message...
Replies
2
Views
1,616
Laarej99
L
A
Connected Components Work Bench Micro 800 PLC Modbus Mapping
Dear all, In CCW modbus Adress mapping where each adress is configured in modbus mapping option.For example I will be mapping some memory bit or...
Replies
1
Views
2,122
damica1
D
C
Banner DX80 Gateway - Micro 800 PLC Modbus Issue
I am attempting to establish Modbus communications between a Banner DX80 Sure Cross Performance Gateway and a Rockwell Micro 820 PLC using the...
Replies
9
Views
8,474
FBergeret
F
I
Allen Bradley 2080 Micro 800 PLC and 2080sc-NTC Card
Hi I am working with Rockwell 2080-LC30 Micro 800 PLC. The Programming software is Connected Component workbench (CCW). I have a 3rd party analog...
Replies
1
Views
5,300
songford
S
Back
Top Bottom