ddemansky
Member
Does anyone know if a Micrologix 1400 Major Error can be reset automatically. Help box says to set S:1/8 to a 1, which should clear major and minor faults on a powerup.
Micrologix 1400 Processor error clearing
- Thread starter ddemansky
- Start date
Similar Topics
Hey all, first time poster here.
I am wondering if anyone has tried using a Keyence SR-X300 barcode scanner to a Micrologix 1400.
Keyence sent...
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Hi, I am working with a Micrologix 1400 model 1766-L32BXB. With no input wires connected to the “in12” thru “in19”, I am getting 24 volts while...
Hi everyone,
I hope I don't butcher this up, please feel free to critique me wherever if I do, I have an issue I would equate to "chasing...
Hi everyone, I'm working on a project where I need to exchange data between a Siemens S7-1200 PLC and an Allen-Bradley MicroLogix 1400 PLC. The...