Micrologix 1400 PTOX ADI

[CRC83]

Hello, I'm looking for assistance with entering a value for the PTOX ADI file. I understand that the ADI has to be high (1) so the accel and decel work independently. I just don't understand how to enter a pulse count value for accel/decel. I want to enter this value from the HIM. So can I MOV a number into a file for this? I appreciate your help!

 

[BachPhi]

Set your ADI to 1, then right click ADP and set you file element like L7:0

 

[CRC83]

I will try that tomorrow. Thank you!

 

[BachPhi]

You are welcome, good luck!

 

[CRC83]

That did the trick. Thank you very much! This is my first time using the PTO instruction. I've done pretty well up to this point, lol.