Micrologix 1400....

[JeremyH]

Hello,

You would use an Ethernet cable to connect the HMI to the PLC or Switch. Yes the G303 can send out emails.

Thanks
Jeremy

 

[rajeesh.k]

Hi All,

I am Using PowerFLex 4 drive and Micrologix 1400 PLC.
I have to communicate between Drive and PLC using Port0 [RS232C/RS485], I am Having
1761-CBL-PM02 Ser C Cable,
I have connected Pin2,Pin3 to the Pn 4,5 of RJ 485 connector and connected to Power FLex4 drive.

Configured CH0 with Modbus RTU.
But the connection not establishing..

I have checked with RS232C connector PLC [PORT2] to Drive using RS232 to RS485 Converter,its working fine..

How its happening ?
Please give me some idea..

Thanks&Regards,
Raj