Micrologix LCD & User defined message

dginbuffalo

Member
D
Join Date
Dec 2010
Location
Buffalo,NY
Posts
630
Hello all,

I'm unfamiliar with Micrologix's LCD user defined messages. Can I have more than 1 message? Is there a way to just scroll to the next one, or do I need a physical way to toggle between LCD instructions?

Thanks for any info.🍻
 

Similar Topics

R
MicroLogix 1400 - Modifying timers from the LCD Screen?
My project uses a MicroLogix 1400. First time I’ve used the 1400; used the 1500 for a few projects. I have 1.5 years’ experience programming...
Replies
11
Views
6,843
FactoryTalktotheHand
F
A
Micrologix 1400 LCD
Hello everyone, I have two questions regarding using the LCD in "User Display" mode. 1. Is it possible to monitor in the program if the cursor...
Replies
0
Views
1,296
alphav
A
B
Micrologix LCD Programming
Hi, I just finished my first ML program where I used the LCD for user input. I think I have it down but would like some of the experts here to...
Replies
2
Views
3,188
kolyur
K
K
Micrologix 1100 LCD programming trouble
Has anyone had success programming the LCD screen on the 1100? I've been working with this for awhile and have discovered that if you're on a...
Replies
5
Views
5,405
eduborda00
E
B
Micrologix 1100 LCD programming
I have a program that has 2 LCD Displays as follows. The first display does not use the User input function. It displays level and temp etc. In...
Replies
1
Views
5,598
Lancie1
Lancie1
Back
Top Bottom