DoktorsSleepless
Member
So I'm building a PLC trainer that includes this VFD I purchased from ebay. Problem is that the guy who sold it to me didn't include a couple important jumpers. It needs the Enable jumper and the Safe-Off jumper. It won't operate without them, and there's no way around them inside the options as far as I can tell. My makeshit solution was just sticking some wire in between the pins so they make contact, but I did that just for testing purposes, and there's no way it will hold.
Is there anyway I could order replacement jumpers somewhere? And what would be the correct size?
Is there anyway I could order replacement jumpers somewhere? And what would be the correct size?