Hello,
I have a Mitsubishi FX3UC plc, and need for four A/B counters. Three of them are on High Speed input (X0-X7), and I use Counter32_M for them, with C252 etc as coils.
However, I need an additional counter. The speed is low (0.2Hz maximum), so I plan to use a normal Input (X12, X13, X14 for A,B,Reset) for this counter. Can I use the counter32_M for that? In that case - what is the counter coil to be used? Or is there any other good ways to achieve this, without having to make the phase counter logic myself?
I have a Mitsubishi FX3UC plc, and need for four A/B counters. Three of them are on High Speed input (X0-X7), and I use Counter32_M for them, with C252 etc as coils.
However, I need an additional counter. The speed is low (0.2Hz maximum), so I plan to use a normal Input (X12, X13, X14 for A,B,Reset) for this counter. Can I use the counter32_M for that? In that case - what is the counter coil to be used? Or is there any other good ways to achieve this, without having to make the phase counter logic myself?