Mitsubishi Q, "Downnload Boot"?

[Weo]

Hi Mitsi Experts,

Don´t work with Mitsi very often.
Will go to site next week and opened up project to have a look, and got confused over the option "Download Boot", see attached pic.

What´s the purpose of this function?
Not described in the help when you hit F1.

Software: GX IEC 7.01
Hardware: Q02

 

[Den Mark]

is the program on the PLC or on your PC?

 

[Weo]

is the program on the PLC or on your PC?

The source code with comments is on my PC.

 

[Den Mark]

friend,

try this link:

http://www.beijer.se/web/BExFilePileAUT.nsf/0/2C8CCD9D840C5A89C12572E9002F7545/$FILE/Beginner.pdf

 

[Weo]

Thanks, but it´s notdescribed in that manual either.
Will give a call to the support to sort it out.

friend,

try this link:

http://www.beijer.se/web/BExFilePileAUT.nsf/0/2C8CCD9D840C5A89C12572E9002F7545/$FILE/Beginner.pdf

 

[Den Mark]

have you tried clicking the ok button friend?

 

[Den Mark]

I have seen on the manual page 87 that dowload boot auto exec file is a default. just try to click ok and then your program will be downloaded to the PLC

 

[Weo]

I have seen on the manual page 87 that dowload boot auto exec file is a default. just try to click ok and then your program will be downloaded to the PLC

I have no problem to download to the CPU, just curious what´s the purpose of function.

 

[Den Mark]

ok maybe some geeks from mits can help you.

gud luck friend