Hi All,
I have a new Micrologix 1400 [1766-L32BXBA -SER. B -REV.B FRN.11]
I am using RS logix 500 Rev. 8.4 and RSLinks Professional 2.50
I communicate very well via Ethernet/Ip, I download the user program to the machine and return to run mode without any problem, Once I cycle the power supply the CPU goes to fault (Major Error code:001AH), Read through Rockwell manual, shows that is related to a compatibility between the OS and the Program) in same time load the default program
The battery is there
Any one have an explanation for this
Your help is well appreciated
I have a new Micrologix 1400 [1766-L32BXBA -SER. B -REV.B FRN.11]
I am using RS logix 500 Rev. 8.4 and RSLinks Professional 2.50
I communicate very well via Ethernet/Ip, I download the user program to the machine and return to run mode without any problem, Once I cycle the power supply the CPU goes to fault (Major Error code:001AH), Read through Rockwell manual, shows that is related to a compatibility between the OS and the Program) in same time load the default program
The battery is there
Any one have an explanation for this
Your help is well appreciated