I am working with the ML 1400 to utilize the HSC, I have set it up and can read from my encoder into HSC:0/ACC. However I need to convert the number in the ACC to something I can scale to a number with decimal point like with a SCP. I would like to read 0-66" for positioning.
I have tried the MOV instruction from ACC to L9:0 but still can only read up to 32767 befor it goes negative.
I tried the CPW instruction and am not sure how to read the number that it produces (4.484155e-41)
I am using RS-Emulate to find a way to read higher PPR encoders in an effort to give positioning and readouts to various axis on a machine.
I have been reading other posts and looking for any AB Tech Note links for examples, any ideas are appreciated-Thanks
I have tried the MOV instruction from ACC to L9:0 but still can only read up to 32767 befor it goes negative.
I tried the CPW instruction and am not sure how to read the number that it produces (4.484155e-41)
I am using RS-Emulate to find a way to read higher PPR encoders in an effort to give positioning and readouts to various axis on a machine.
I have been reading other posts and looking for any AB Tech Note links for examples, any ideas are appreciated-Thanks