ML1400 Modbus RS485 Communication.

You are most welcome, I'm glad you found it usefull. Unfortunally for me, the end customer didn't wan't the cabinet after all. Hopefully I can use this information I've learned on future cabinets.

I hope that your setup runs smothly adn your customer will appreciate it!

/Tim
 

Similar Topics

OkiePC
ML1400 Modbus RTU Slave extended files
If I set up a ML1400 as a Modbus RTU slave, and click the extended files tickbox, then set up my files with 200 elements, will the Modbus...
Replies
1
Views
1,075
OkiePC
OkiePC
theColonel26
RS 500 ML1400 - Multiple Modbus TCP Reads & Writes
I need to do 5 reads and 1 write on 2 devices. So that is 10 and 2 total. It seems I can't use indirect addressing with MG registers, which is...
Replies
11
Views
3,124
drbitboy
drbitboy
N
MODBUS / ML1400 help?
I have a device that I am communicating with here that is using Modbus to store values from a gas analyzer and I want to transfer these to a PLC...
Replies
9
Views
3,765
Nhrafan26
N
E
ML1400 Modbus to Epson Robot Issue
I am currently working on a project with an Epson Scara robot using an RC-90 controller communicating with a ML1400 Ser. B PLC. The robot...
Replies
4
Views
4,002
Evan.rice44
E
L
ML1400 Modbus RTU Not Sending Data
I have an Allen-Bradley MicroLogix 1400, and have been working with it for a few months now and understand its basics pretty well. Up to now I've...
Replies
4
Views
3,950
Lewis11
L
Back
Top Bottom