modbus communication in tia poratl ver13 s7-300

adam_eyad

Member
A
Join Date
Nov 2019
Location
saudi arabia
Posts
14
there is status 16#7000 for modbus master block and there is no data appear
when make communication between plc s7-300 and generator deap see 8610
i use cp341 in plc for rs485 communication
 

Similar Topics

F
Modbus TCP communication
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
10
Views
327
Contr_Conn
Contr_Conn
Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
114
Voltimus
Voltimus
S
Modbus communication help
Hi all I need help on this As in my project used Schneider TM241 controller. Now I want to communicate Elite energy meter with controller by...
Replies
3
Views
192
Corsair
C
J
Schneider M221 ModBus RS-485 Communication
Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
212
jillgeorge18
J
A
FATEK modbus TCP communication fail with energy meter
Hi, i cant establish communication between fatek plc with an energy meter, both capable for modbus tcp, i did with modscan but fatek plc does not...
Replies
1
Views
179
plctobal
P
Back
Top Bottom