Modbus communication with K120S

razm

Member
R
Join Date
Aug 2012
Location
israel
Posts
2
I need to set up a modbus communication between an operating panel (which will be the master) and a PLC type K120S by LSis.
Does anyone have an experiance with this unit and know how can i set it to be modbus RS485 slave?

thanks
 

Similar Topics

K
modbus communication in PLC k120s
hallo,, my name is Bima, I'm a student & now I'm studying modbus communication in PLC. I use the master-k120s from LG. I learn from the manual...
2
Replies
17
Views
8,634
kurobima
K
F
Modbus TCP communication
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
6
Views
167
Contr_Conn
Contr_Conn
Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
112
Voltimus
Voltimus
S
Modbus communication help
Hi all I need help on this As in my project used Schneider TM241 controller. Now I want to communicate Elite energy meter with controller by...
Replies
3
Views
190
Corsair
C
J
Schneider M221 ModBus RS-485 Communication
Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
211
jillgeorge18
J
Back
Top Bottom