lwgrimm
Member
I have modbus RS485 reading into device address on IDEC PLC.
The data same with what I get from Allen Bradley PLC.(-32768,17437)
I can monitor the data as :
D3000 DEC(I) -32768
D3001 DEC(I) 17437
Represents Flow rate of 630 barrels an hour.
Identical as Allen Bradley PLC.
I can use an instruction "Copy Word" to combine D3000 and D3001 to reflect
flow rate of 630 in AB.
Not sure which instruction to use in IDEC Windldr.
The data same with what I get from Allen Bradley PLC.(-32768,17437)
I can monitor the data as :
D3000 DEC(I) -32768
D3001 DEC(I) 17437
Represents Flow rate of 630 barrels an hour.
Identical as Allen Bradley PLC.
I can use an instruction "Copy Word" to combine D3000 and D3001 to reflect
flow rate of 630 in AB.
Not sure which instruction to use in IDEC Windldr.