H2Otbaker
Member
I have 6 lift stations through out a plant. Will be looking at 4-20 feedback from levels and controlling pumps. My plan is to use universal remote i/o modules as slaves and run a Micrologix 1400 as the master. My question is will this actually work with the modules only supporting Modbus TCP? The Micrologix 1400 series B, to my understanding has the capabilities but i'm still unsure of it. Normally I would have several processors out and just MSG/multi-hop to each back and forth. Any ideas or suggestions on using the Micrologix 1400 Master setup? Unfortunately the company isn't ready to move up to compact or control logix just yet. Thanks all