Modbus with ML1200 & 1500

Nikhil

Member
N
Join Date
Dec 2003
Posts
23
I wanted to know whether one can connect the A-B Micrologix 1200 or 1500 on the Modbus RTU network as a master or a slave?? If so, what interface do I have to add to the controller network??
P.S. I have read the earlier threads on this topic but they were about Modbus TCP/IP and were more generic, Please Help!!!!!
 

Similar Topics

N
ML1200 modbus with NC01
Hi, Though previously I have worked with ML1200 with Modbus using NET-AIC, I want to confirm that whether it is possible with NC01 or not. I...
Replies
2
Views
1,772
Mickey
Mickey
J
Need help for modbus communication in ML1200
Hello everyone, M using micrologix 1200 and it is connected to net-aic using pm02 cable, then net-aic is connected to my laptop using pm02 and a...
2
Replies
15
Views
3,954
JaiDutt
J
bundhit
How to online/run ML1200, its CH0 is config as "Modbus RTU Slave"
I use RSLogix500 downloas backup program to ML1200 via DF1 driver. In the backup program, the channel was configured as "Modbus RTU Slave" So...
Replies
2
Views
1,767
bundhit
bundhit
F
Modbus TCP communication
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
2
Views
100
Contr_Conn
Contr_Conn
R
Modbus Master Siemens S7-300 - OB35?
Hi, I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why? Could...
Replies
10
Views
111
Lare
L
Back
Top Bottom