sparky mark
Member
Does anyone know how to get a Panelview Plus 1000 to communicate to a Modicon 984 PLC?
The original MMI is to be replaced with the Panelview Plus.
The MMI is only communicating to one PLC.
I think the original XYCOM MMI used a serial cable to a port on the face of the PLC CPU.
Do I need software drivers or a communication module with a standard Panelview Plus?
The original MMI is to be replaced with the Panelview Plus.
The MMI is only communicating to one PLC.
I think the original XYCOM MMI used a serial cable to a port on the face of the PLC CPU.
Do I need software drivers or a communication module with a standard Panelview Plus?