EICS
Member
I am looking at a bakery oven that has been dismantled and in storage for unknown time, it was manufactured in 2012 so not that old. my gig is to try to extract the PLC & HMI applications and get this running. I am lucky to have the schematics and may be lucky enough to find the original application designed (its a long shot so maybe)
I am hoping someone can help me out with info on the following
as i have little experience with Modicon (I did modify a TSX PLC 16 years ago) I need some help.
I am hoping someone can help me out with info on the following
- Schneider (Modicon) Model # TM238LDDC24T PLC with I/O Expansion cards
- Schneider Magelis HMI (part number to follow)
- what software do i need to extract PLC program
- is the above available in a demo mode or licensed
- What interface lead is needed
- do i need original PLC application program to do the above
- what software do i need to extract HMI program
- is the above available in a demo mode or licensed
- What interface lead is needed
- do i need original HMI application program to do the above
as i have little experience with Modicon (I did modify a TSX PLC 16 years ago) I need some help.
Last edited: