Modicon Micro84

TheWaterboy

Lifetime Supporting Member + Moderator
Join Date
May 2006
Location
-27.9679796,153.419016
Posts
1,940
A lifetime ago I built a couple systems with Modicon Micro84 controllers that are still running. But today one of those died and they reached out to me from the grave and are looking for a spare. Anyone still have any of these dinosaurs holding up a door somewhere?
 
I still have a user's manual from 30 years ago when I backed up several of them that were being moved.
But if they were able to find one, do they still have a functioning programmer and program packs? My memory of 30 years ago was high failure rate (> 33%) of program packs.
 

Similar Topics

Hello All, I am stumped on how to convert a %MW to a %MF using Machine Expert Basic and a Modicon M221. The help files show a word to a double...
Replies
4
Views
187
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
108
Hello All, Was hoping I could get a little help with Modicon ladder logic. This is the first time I have seen Modicon logic and currently trying...
Replies
6
Views
318
I have a 170AAO92100 card that I am interested in using as a 10 volt output. Is there setup that I have to do in order to change output or simply...
Replies
0
Views
110
Hi, Seeking consultation on an implementation matter, and have a question about Modicon Compact 984 communication through RS485: Three Modicon...
Replies
6
Views
374
Back
Top Bottom