Modicon NWBM85000 Manuals
- Thread starter dhanad
- Start date
Configuring NW-BM85-000 Modbus multiplexer using Hyperterminal
Can anybody confirm whether we can configure the NW-BM85-000 Modbus multiplexer using Hyperterminal? If so can brief about the setting to be made?
Thanks and Regards
Dhanaprakash
Can anybody confirm whether we can configure the NW-BM85-000 Modbus multiplexer using Hyperterminal? If so can brief about the setting to be made?
Thanks and Regards
Dhanaprakash
Similar Topics
Hello All,
I am stumped on how to convert a %MW to a %MF using Machine Expert Basic and a Modicon M221. The help files show a word to a double...
A lifetime ago I built a couple systems with Modicon Micro84 controllers that are still running. But today one of those died and they reached out...
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Hello All,
Was hoping I could get a little help with Modicon ladder logic. This is the first time I have seen Modicon logic and currently trying...
I have a 170AAO92100 card that I am interested in using as a 10 volt output. Is there setup that I have to do in order to change output or simply...