Kenny Teixeira
Member
I just installed PL7 Pro Version 3.0 for a Modicon TSX57 processor and the Uni-Telway configuration says “Driver missing or invalid”. Does anybody have or have a link to the proper driver?
Modicon UNI-TELWAY Driver for Windows XP
- Thread starter Kenny Teixeira
- Start date
http://www.schneider-electric.com/corporate/en/products-services/automation-control/products-offer/range-presentation.page?p_function_id=25&p_family_id=498&p_range_id=544#
There are also driver packs to download. MAke sure you have the latest drive pack and unitelway driver.
You should also be able to get the driver of the PL7 cd's
There are also driver packs to download. MAke sure you have the latest drive pack and unitelway driver.
You should also be able to get the driver of the PL7 cd's
Kenny Teixeira
Member
OP
I installed virtual PC and then Windows 98 as a virtual PC and it works fine.
Similar Topics
Hello All,
I am stumped on how to convert a %MW to a %MF using Machine Expert Basic and a Modicon M221. The help files show a word to a double...
A lifetime ago I built a couple systems with Modicon Micro84 controllers that are still running. But today one of those died and they reached out...
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Hello All,
Was hoping I could get a little help with Modicon ladder logic. This is the first time I have seen Modicon logic and currently trying...
I have a 170AAO92100 card that I am interested in using as a 10 volt output. Is there setup that I have to do in order to change output or simply...