Module for comunication with Modbus TCP/Modbus RTU bridge

Join Date
Mar 2015
Location
Mariupol, Ukraine
Posts
71
Hello!
Would you please advice me which module between 140 NOC 771 10, 140 NOC 780 00, 140 NOC 781 00 can I select to communicate with Modbus TCP/Modbus RTU bridge? I found out in the catalog that all these modules support Modbus TCP IO scanning. But which is the best one for my application?
Any your help I will appreciate a lot :)
 

Similar Topics

Hello everyone! I am using Siemens S7 PLCSIM to test my ladder program. Unfortunately the Communication module can't be tested because there is no...
Replies
5
Views
5,165
Hello everyone, I've had this issue for the last 2 days where I try to assign the profisafe address to an IO block (6ES7 146-6FF00-0AB0) but when...
Replies
5
Views
114
Hey guys, I just wanted to see if any of the bright minds on here had any opinions on these relay interface modules. Particularly, I would love to...
Replies
1
Views
53
Hi Everyone, i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
Replies
11
Views
268
Good afternoon, I am currently working with an HMI/PLC LP-a070 and I require at least one analog output, but the PLC does not have one. I was...
Replies
5
Views
126
Back
Top Bottom