Hi Everyone. I am trying to extract the file from an old MTA-G1. I have the MAG Prog 9 cable and SW-MTA-WIN (vers 1.10 and 1.0).
I checked the com config on the HMI and it is now matching the laptop I am using, which by the way, is an old Winbook with windows 2000.
I've tried both versions of software and even changed my order of operations, in terms of; directly trying to transfer from the HMI, receiving from the HMI with SW-MTA-WIN, selecting transfer on the HMI and then receive in the software and vice-versa. No Luck. Timeout in the software and transfer error on the HMI. Thought, I did see a checksum error on the HMI with one configuration I tried.... Any suggestions?
Thanks in advance
I checked the com config on the HMI and it is now matching the laptop I am using, which by the way, is an old Winbook with windows 2000.
I've tried both versions of software and even changed my order of operations, in terms of; directly trying to transfer from the HMI, receiving from the HMI with SW-MTA-WIN, selecting transfer on the HMI and then receive in the software and vice-versa. No Luck. Timeout in the software and transfer error on the HMI. Thought, I did see a checksum error on the HMI with one configuration I tried.... Any suggestions?
Thanks in advance