sameerrmore
Member
Hi Everyone,
Working on Piston(Foundry) project where GE-Fanuc PLC's are used. We have used Cimplicity SCADA 8.0 for temp and Pouring material cooling timer.
For PLC we have using Proficy Machine addition 6.0
Issue we are facing is Pouring material cooling timer is automatically changes it value in some cycle and liquid form iron get spread over shop.
Do anyone have suggest any sensor for detecting iron is in liquid form OR any other suggestion.
Working on Piston(Foundry) project where GE-Fanuc PLC's are used. We have used Cimplicity SCADA 8.0 for temp and Pouring material cooling timer.
For PLC we have using Proficy Machine addition 6.0
Issue we are facing is Pouring material cooling timer is automatically changes it value in some cycle and liquid form iron get spread over shop.
Do anyone have suggest any sensor for detecting iron is in liquid form OR any other suggestion.