hello ,
it's my first post ,and I'm proud to be a part of an amazing community such as yours.
so,currently I'm at the end of my training period to start working on PLC/HMI specially SIEMENS and LSIS
my trainer gave my that program to try to execute as a challenge
1- i have 5 (Pb's) each one operate a specified motor,so i have 5 motors + one switch "RUN"
2- the required is when i push the 5 Pb's in any random sequence ,and then press a main "RUN" switch , the 5 motors operate with the same sequence !!!
for example:
if I pressed PB 1 then 4 then 3 then 5 then 2
and then pressed the "RUN" switch
the 5 motors operates with the same order of the pressed PB'S with (let's say 10 seconds) delay between each others
and so on,with any random sequence.
note: he gave me a hint to use indirect addressing, but still i couldn't perform the ladder program
so, help please
it's my first post ,and I'm proud to be a part of an amazing community such as yours.
so,currently I'm at the end of my training period to start working on PLC/HMI specially SIEMENS and LSIS
my trainer gave my that program to try to execute as a challenge
1- i have 5 (Pb's) each one operate a specified motor,so i have 5 motors + one switch "RUN"
2- the required is when i push the 5 Pb's in any random sequence ,and then press a main "RUN" switch , the 5 motors operate with the same sequence !!!
for example:
if I pressed PB 1 then 4 then 3 then 5 then 2
and then pressed the "RUN" switch
the 5 motors operates with the same order of the pressed PB'S with (let's say 10 seconds) delay between each others
and so on,with any random sequence.
note: he gave me a hint to use indirect addressing, but still i couldn't perform the ladder program
so, help please