Sir i m new to that forum.i am a electronics engg. student and nowadays i m doing my fyp. i m facing a problem. i want that when i press a button in hmi a task is done and at same time my screen must be switch to next screen. i m using Fatek plc and weintek hmi. need plz asap.
need help in wientek i series hmi
- Thread starter gulfam
- Start date
Put an invisible function button on top of the button that does your task.
Create your normal task button.
Next, create a Function (screen change) button. Uncheck "Use Shape". This will make the button invisible. Size it the same as your task button, and place it on top of it. It will be transparent.
When the user touches the task button, both buttons will be executed.
Create your normal task button.
Next, create a Function (screen change) button. Uncheck "Use Shape". This will make the button invisible. Size it the same as your task button, and place it on top of it. It will be transparent.
When the user touches the task button, both buttons will be executed.
Similar Topics
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
I'm fairly new to Rockwell software, I've had some basic training in the past but nothing too advanced. My company and I use Reliable products for...
Hi all,
I am having issues accessing my Cimplicity software - the site code changed after re-install and I am no longer able to attain a new key...
Good day all! Can someone help me with the procedure to update Beijers E700 firmware? The Panel I am working on is firmware 2.04v and I would...