need help with vision software choice

[bigrthanur]

Hello! I have an old presco machine that was used to inspect preforms for the bottle making industry. I want to use all the mechanics of the machine but scrap the sofware and camera.

I need a system (somewhat cheap less than 100k) that will take pictures of the cavity numbers and do inspections at the same time. the camera would have to take a 360deg. picture to accomplish this (4pics put together)

Does anyone have any suggestions?

 

[CharlesM]

I have seen ads for Cognex using 4 cameras to do a 360 deg veiw.

http://www.cognex.com/productsservices/industryspecificproducts/default.aspx?id=126

 

[Kev77]

Cognex (now DVT) works very well. I have also seen some Sick vision systems. I have seen some Keyence system demos and they look good as well.

 

[bigrthanur]

Cognex (now DVT) works very well. I have also seen some Sick vision systems. I have seen some Keyence system demos and they look good as well.

I was looking into the cognex system, we currently use dvt software to do bottle inspections.

 

[RussB]

http://www.bannerengineering.com/en-US/products/5/Vision