Need to make Existing Wonderware Intouch talk to my s7-300 PLC Simulator

315-2 DP with a 343-1 Lean CP.

Oh, believe me, I'm not happy about the simulator situation. He and I will discuss this next week.

When I check diagnostics on the 343-1 Lean, it shows Send/Recv Communications is in Stop Mode and cause being 'not configured'. Where do I find the right place to edit so I can reactivate this thing?

Thanks!
 

Similar Topics

K
Need Help Modifying Citect Scada Historical Trend Variable Data
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
Replies
0
Views
50
kreamsippycup
K
P
🔧🔌 New to Motor World! Need some guidance. 🔌🔧
I've got this 3-phase 575V motor that we're controlling with a VFD (Variable Frequency Drive), which has been quite the learning curve in itself...
Replies
10
Views
282
tripstuf2
T
D
I need help to make a Working Schedule for Make-up Air unit
I'm fairly new to Rockwell software, I've had some basic training in the past but nothing too advanced. My company and I use Reliable products for...
Replies
11
Views
347
drbitboy
drbitboy
C
Need Help Accessing/Printing a Program - CIMPLICITY
Hi all, I am having issues accessing my Cimplicity software - the site code changed after re-install and I am no longer able to attain a new key...
Replies
10
Views
173
Steve Bailey
Steve Bailey
E
Need help updating E700 firmware from 2.x to 6.x. Have E700v610.bin file.
Good day all! Can someone help me with the procedure to update Beijers E700 firmware? The Panel I am working on is firmware 2.04v and I would...
Replies
1
Views
76
parky
P
Back
Top Bottom