NMEA0183 with PLC

oko

Member
O
Join Date
Aug 2009
Location
Skala
Posts
6
Hi - Is there anyone in here that has done some PLC programming for the NMEA0183 protocol? or has some cicode example for reading/controlling NMEA0183 with Vijeo Citect?
I have been asked to integrate a valve system that uses the protocol NEMA0183, in a Vijeo Citect project, which also includes a PLC.

Best Regards
Oliver
 
I had to interface with a GPS from a Beckhoff PLC once using NMEA0183. I don't have the project anymore, so I can't help you there but it was very simple as far as I remember.
 

Similar Topics

A
Gps nmea0183
Hi! i need to connect a mushrom GPS antenna nmea0183 to my wago PFC-200 is there someone who has some best practice methood to do this?do i need...
Replies
0
Views
1,093
armada
A
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
9
Views
189
mburtis
M
N
Conveyor PLC
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Replies
5
Views
186
geniusintraining
geniusintraining
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
40
Tecnolaundry
T
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
10
Views
250
bkottaras
B
Back
Top Bottom