John Morris
Lifetime Supporting Member
Good afternoon
I am working a Micrologix 1100 series A. ( yes I like working backwards)
In the manual it lists the inputs and commons associations. The last three listed to the right are IA COM IV1(+) IV2(+).
These come after I:0.9, one would do the wrong thing and assume it's I:0/10 and 11.
But in the input Data file under a decimal radix, the analog inputs are listed as I:0.4 and .5
Actually the whole thing is confusing, the data file list 5 inputs on the 1100, but the physical count is 10 digital in and two analog in..
Clear as MUDD, any understanding would be appreciated.
I am working a Micrologix 1100 series A. ( yes I like working backwards)
In the manual it lists the inputs and commons associations. The last three listed to the right are IA COM IV1(+) IV2(+).
These come after I:0.9, one would do the wrong thing and assume it's I:0/10 and 11.
But in the input Data file under a decimal radix, the analog inputs are listed as I:0.4 and .5
Actually the whole thing is confusing, the data file list 5 inputs on the 1100, but the physical count is 10 digital in and two analog in..
Clear as MUDD, any understanding would be appreciated.
