NT HMI Pop ups

[Doug Grice]

How can I screen jump to a pop up window using a serial A device from the pLC, Im just not seeing it, if it is possible. Hmmmmmm....

 

[panic mode]

Start "NT Series Support Tool".

From the Tools menu select PT Configuration.
Check setting on the last tab (Control/Notify Area).

 

[Doug Grice]

Panic Mode,
I apologize, I was wrong, it is a NS8.

 

[panic mode]

Start NS Designer,
From menu Settings(S) select System Settings(R)
and check Inital tab. You can map System Memory to PLC.
It comes with lots of options - see System Memory List (Y).

 

[Doug Grice]

Thanks Panic Mode

Seems like I can only use 3 pop ups but I guess I can make that work.

 

[panic mode]

i never use "pop up" screens, only full screens. and you can have as many as you want (or memory allows...)

 

[Doug Grice]

Kinda lost on it, all I see is strobe screen. All I want to do is switch screen on bit true from plc, or bit out. And why is everthing coming from a "DM" and not a bit reference. I thought DM was to store data and not just a simple "bit on/off".