NTsx (nt3) Omron

[jason.inkpen@agrisen]

Hello,
Can anyone send me some program samples for setting up alarms on the NT3 hmi

Thanks

 

[sthompson]

Jason:

I have done several Omron HMIs, but I am not familiar with the NT3. Nor did I have any luck on Google. Do you have a more complete Model Number? I assume you are using NTST the NT Series Support Tool to program it?

Stu.....

 

[bluebyu]

You may find examples in the manual. It can be downloaded from here.

http://industrial.omron.eu/en/services_and_support/download_centre/default.html

 

[jason.inkpen@agrisen]

yeah sorry,

The model is NT3S-ST126B-E.....?

 

[sthompson]

I haven't worked on one of those, and I don't have the NTsx Software.
The Link to the manual posted by Bluebyu does have a section on setting up alarms, so start there.
Hopefully, someone with experience with them will show up.

 

[jason.inkpen@agrisen]

Thanks all

I've got it! all very easy i just had to set the alarms as a HR/IR word and the alarms are then the the coil addresses EG :- 10.00 alarm 0 , 10.01 alarm 1 and so on. I was over complicating as usual !!!