OLD FEAC PC-116-24 Programmable position control - Manual?

[Nortkan KC1]

Hello all,

I have an old machine that utilizes two FEAC PC-116-24 controllers used for position monitoring and output to an OMORM CQM1 PLC. I did find some used ones for sale online, but none of them come with manuals.

There are two linear transducers on the clamp and injection head cylinders that are wired to two FEAC PC-116-24 controllers. The controllers fire a digital output to a PLC input when the appropriate position is reached. They pick up on several pre-programmed positions from the analog transducers as the cylinders extend and retract.

Anyone know of a manual for these FEAC units so I can get this injector running? The machine was manufactured by MULTIPLAS.

If anybody can help. it would be great.

 

[Nortkan KC1]

Forgot to add that it basically is an A/D converter unit that the manufacture of the machine stopped using approx. 10 years ago. Still surprising that there is absolutely no information available for this control online.