Omron + 2 Intouch Scada laggy

dkulot

Member
D
Join Date
Mar 2015
Location
Croatia
Posts
1
Hi all, i'm new to this forum, and would really appreciated help with this matter:

I have Omron PLC CJ2M CPU35, 2 indentical scada on WW Intouch 2014, and Wonderware DAServer for Omron (DASOmronEth), and when one of the scada is on network everything works well, but when i connect both it is very lagging and slow, statuses are updated every couple of seconds, commands sometimes can't go to PLC from one scada, but it's ok on second...

Did anyone had problem like that?
 

Similar Topics

N
Omron,lookout and intouch
Hello! I like to Communication omron CPM2a whit Intouch. For Omron host link and driver i like to use lookout 6.1 and for disigne intouch. It is...
Replies
0
Views
1,536
nlc20
N
H
Connect Omron CPM2a to InTouch
Please help me conect CPM2A to InTouch I have CIF01 adapter to RS232 and I/O server in InTouch but it did not have option for this controler What...
Replies
2
Views
3,772
seppoalanen
seppoalanen
M
Omron plc backwards compatibility
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
60
IO_Rack
IO_Rack
BobB
SMS messaging from an Omron CJ2M-CPU31
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
5
Views
188
BobB
BobB
I
omron cj2m with scada comunication
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
76
IO_Rack
IO_Rack
Back
Top Bottom