Omron 3G2A6-LK201

You may find one on Ebay or one of the PLC vendors who sell old and refurbed gear.
 
Hi Bob,
There are plenty out there but everyone wants a small fortune for them. I want to turn on some lights around the house without spending money. I have a C20 with expansion IO as well. Two perfectly good PLCs that can't be programmed. That makes me a little sad ;-)
 
While it's nice to re-use old stuff, you can buy a Click for a fraction of the cost and have something much better. The C__H series has been obsolete for years. The best use of them is their small socketed relays in my opinion.
 

Similar Topics

I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
32
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
5
Views
180
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
73
Hi all, i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info. my unit has an ip address of...
Replies
3
Views
113
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
271
Back
Top Bottom