Omron and storing program to EEPROM

[koron]

Hello all,
we have CX Programmer V 5.0 and PLC CQM1 with CPU21. We can edit program, but when we switch plc off/on, then original program from EEPROM is reloaded. We did not find any possibility, in CX Programmer, how store edited program to EEPROM. My question is: "how can I store it to EEPROM ?"

Thanks in advance

Petr Slovak

 

[BobB]

I do not have time to look things up now but if you get hold of the manual for the PLC, download from Omron, you can write to the EEPROM by setting DIP switches on the processor - it is a hardware thing not CX-Programmer.

 

[gtsuport]

As usual, Bob is correct!!

You need to look in the W228 manual.
The procedure is detailed in that manual.

Hope this will help