Omron cji md232 Mil Conector

[rgmiles]

Hi Guys.
I want to use an Omron 32 point card .
I need the pinout diagram for the mil 20 connector.
Does anyone know where i can find this??
I have searcherd the Omron site to no avail.
Many Thanks
Bob

 

[RezaSoleimani]

What do you want?32 point Inputs or Outputs?

 

[rgmiles]

Hi M8
I need 16 in and 16 out.
It is a cjim md232 card.
Thanks
Bob

 

[BITS N BYTES]

Exerpt from the W393-E1-10 Operation Manual

 

[rgmiles]

Many many thanks, I spent an awful long time looking for that doc on the omron website.
happy holidays
Bob

 

[RezaSoleimani]

Cj?m

Where have you found this card?
I searched and I asked for my many friends,nobody does'nt recognize this card.

 

[BITS N BYTES]

Where have you found this card?
I searched and I asked for my many friends,nobody does'nt recognize this card.

Where are you searching??
Try any Omron Industrial Automation website and the CJ series PLC is well documented.

Here's one:-
http://www.omron247.com/Industrial-Automation/Store/OmronCategoryView_10051_10051_-1_12263?WT.svl=3

 

[RezaSoleimani]

cj?m

Dear my friend

Are you sure that it is cjim?
Mabe it is cj1m !!
I'm not able to find cjim in omron site.

 

[BobB]

Just look up CJ1 - does not matter which processor.