I am using the MAX(182) instruction to find the largest value in a range of DM. As I have the instruction set it is putting the address of the largest number in IR0. I can't figure out how to use the address in IR0 to identify the DM it is referencing.
Ultimate goal, of the 16 DM that are involved I want to be able to identify them on an HMI as 0-15. The DM contains timer values and I want to identify the timer with the largest value on every HMI screen.
Thanks,
Don
Ultimate goal, of the 16 DM that are involved I want to be able to identify them on an HMI as 0-15. The DM contains timer values and I want to identify the timer with the largest value on every HMI screen.
Thanks,
Don