Henrit Member H Join Date May 2019 Location Saku Posts 13 Jun 6, 2019 #1 Is it even possible to conevert NB HMI program TO NC HMI programm or how to get .csv file from cx programmer for some reason program named tag database converter gives me errors. Does anybody have ideas?
Is it even possible to conevert NB HMI program TO NC HMI programm or how to get .csv file from cx programmer for some reason program named tag database converter gives me errors. Does anybody have ideas?
sigmadelta Member S Join Date Apr 2016 Location From Canada - Living in Bulgaria Posts 2,010 Jun 6, 2019 #2 There is no csv import/export of symbols from CX-Programmer to CX-Designer. You have to copy/paste the symbols from CX-Programmer to CX-Designer. See page 66 of 118 from the manual below: https://assets.omron.eu/downloads/manual/en/v1/v099_ns_series_cx-designer_users_manual_en.pdf
There is no csv import/export of symbols from CX-Programmer to CX-Designer. You have to copy/paste the symbols from CX-Programmer to CX-Designer. See page 66 of 118 from the manual below: https://assets.omron.eu/downloads/manual/en/v1/v099_ns_series_cx-designer_users_manual_en.pdf
sigmadelta Member S Join Date Apr 2016 Location From Canada - Living in Bulgaria Posts 2,010 Jun 6, 2019 #3 As for converting an NB panel to an NS panel (I think you mean NS, not NC), I don't think there is an automatic way to do that.
As for converting an NB panel to an NS panel (I think you mean NS, not NC), I don't think there is an automatic way to do that.
Henrit Member OP H Join Date May 2019 Location Saku Posts 13 Jun 7, 2019 #4 I mixxed up everything I meant from NQ desinger to NB desinger, sorry I haven t used these desingers before.
I mixxed up everything I meant from NQ desinger to NB desinger, sorry I haven t used these desingers before.