jorden.khan Member J Join Date Sep 2015 Location karachi Posts 3 Sep 12, 2015 #1 hi, i have omron nt631c-st153-ev3 not connected with that cable, all the time it has an Connection time out Error..?? can some one tell me what should i do..??/ Br, Jorden
hi, i have omron nt631c-st153-ev3 not connected with that cable, all the time it has an Connection time out Error..?? can some one tell me what should i do..??/ Br, Jorden
BobB Lifetime Supporting Member Join Date Jun 2002 Location Sydney Posts 4,557 Sep 12, 2015 #2 Check the manual - I think they used a full duplex cable.
ariek dwi putro Member A Join Date Apr 2008 Location at ngawi Posts 8 Sep 13, 2015 #3 Check all DM(Data Memory) Setup on the PLC,read the manual programming PLC and the manual programming of NT631c
Check all DM(Data Memory) Setup on the PLC,read the manual programming PLC and the manual programming of NT631c
BobB Lifetime Supporting Member Join Date Jun 2002 Location Sydney Posts 4,557 Sep 13, 2015 #4 Here is a link to fix a possible problemhttp://forums.mrplc.com/index.php?app=downloads&showfile=1029
Here is a link to fix a possible problemhttp://forums.mrplc.com/index.php?app=downloads&showfile=1029
BobB Lifetime Supporting Member Join Date Jun 2002 Location Sydney Posts 4,557 Sep 13, 2015 #5 Here is a link to Omron cables - you need cable C200H-CN220-EU - it is a fully wired cable. http://forums.mrplc.com/index.php?app=downloads&showfile=74
Here is a link to Omron cables - you need cable C200H-CN220-EU - it is a fully wired cable. http://forums.mrplc.com/index.php?app=downloads&showfile=74
jorden.khan Member OP J Join Date Sep 2015 Location karachi Posts 3 Sep 14, 2015 #6 thanks to everyone, i have found a cable