omron PID E5CN-rmt-500 240v need help

[maheel]

Hi i am a newbie and looking for some help..

I have 2 of these pids and when the "output 1" lights up i dont get any voltage output to the "output 1" terminals

i am using them to run a cooling fridge with a relay (240V)

are they stuffed or can the output voltage be turned off?

it should be 240V @ 3A but i dont get anything to drive my relay.....

any help? or BIN them, they read temps well.......

thanks

 

[maheel]

come on every one, i thought you would no the answers here.......

bit of help please, are they stuffed?

 

[PMCR]

E5CN-RMT-500 is a relay output unit, not a voltage output.
Check for continuity across pins 1 and 2.
No voltage will be present unless voltage is applied externally.

 

[maheel]

oh man i feel stupid......

i was expecting it throw out 240 to run the relay.......

pid works but need to re-do wiring....

thanks