OMRON sysmacC40K and GT-11 from NAIS!!!
- Thread starter karlag
- Start date
gtsuport
Member
I would really agree with BobB on this one.
However, if you really have your heart set on this, it will require a 3G2C7-LK201-EV1 Host Link Unit.
Hope this will help.
However, if you really have your heart set on this, it will require a 3G2C7-LK201-EV1 Host Link Unit.
Hope this will help.
Similar Topics
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Hi all,
i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info.
my unit has an ip address of...
Hi all,
Currently having trouble getting a speed reference to write over modbus to an Omron M1...
I can successfully write a run command and...