gkp741 Member G Join Date Mar 2009 Location Utah Posts 6 Apr 7, 2009 #1 To drive external 12V DC relays off of the DC ZEN, do I need a load or diode in parallel with the driven relay coil? Thanks.
To drive external 12V DC relays off of the DC ZEN, do I need a load or diode in parallel with the driven relay coil? Thanks.
gtsuport Member G Join Date Feb 2005 Location Grand Rapids, MI Posts 1,322 Apr 7, 2009 #2 From the ZEN manual (see attached): NOTE: There is a typo in the manual. It reads input, but this is from the output section and wiring indicates output.
From the ZEN manual (see attached): NOTE: There is a typo in the manual. It reads input, but this is from the output section and wiring indicates output.