Hi.
I have a smallish machine on which I want to add internal lighting.
My problem is that the available space where I want the lighting is really minimal. I can find some vendors of industrial lights such as Banner WLS28-2XW145DX
https://www.bannerengineering.com/be/en/products/part.87954.html
These are unfortunately a bit too large. Rather than one LED-bar, I would prefer several smaller LED spots.
I can find plenty of LED light spots, but none that are industrially suited.
Should be IP40 and for 24V, preferably connects by a connector or has an integrated cable. Not single wires and not a naked PCB that requires a soldering iron !
I am looking for something that is approx 30 x 30 x 20 mm in size, and with 100 lm - 200 lm per light spot. To be held in place either by magnets or by mounting screws flush to a surface.
Any ideas ?
I have a smallish machine on which I want to add internal lighting.
My problem is that the available space where I want the lighting is really minimal. I can find some vendors of industrial lights such as Banner WLS28-2XW145DX
https://www.bannerengineering.com/be/en/products/part.87954.html
These are unfortunately a bit too large. Rather than one LED-bar, I would prefer several smaller LED spots.
I can find plenty of LED light spots, but none that are industrially suited.
Should be IP40 and for 24V, preferably connects by a connector or has an integrated cable. Not single wires and not a naked PCB that requires a soldering iron !
I am looking for something that is approx 30 x 30 x 20 mm in size, and with 100 lm - 200 lm per light spot. To be held in place either by magnets or by mounting screws flush to a surface.
Any ideas ?