504bloke
Lifetime Supporting Member
Hi
Anyone know what the pinouts on the control (ie start/stop etc etc) plug is on a
Fugi Invertor FMD 5AN 21
This is a unit from a Fanuc CNC Lathe around 20 years old.
I have been told the connector on the drive is a Honda type connector.
It has 25 Pins
2 rows of 9 top and bottom with 7 in the middle of these.
Anyone know what the pinouts on the control (ie start/stop etc etc) plug is on a
Fugi Invertor FMD 5AN 21
This is a unit from a Fanuc CNC Lathe around 20 years old.
I have been told the connector on the drive is a Honda type connector.
It has 25 Pins
2 rows of 9 top and bottom with 7 in the middle of these.
Last edited: