gatfu
Member
Hi all...I currently have an ab ML 1100 with a program that needs to incorporate a PID loop based on an O2 sensor. I have no experience with O2 sensors and I am looking for either a good off the shelf sensor to work with my controller or simply figure out how to pull in the data from the current Lamda sensor i already have. This is an automotive sensor on an exhaust system on a generator. If anybody knows anything about O2 sensors and how to pull the raw data off any help would be greatly appreciated. I basically need to know how to pull in the data to my controller utilizing my analogue inputs. all searches that i have tried so far are pretty much criptic. Thanks in advance for your help!