Panasonic FP-Sigma Code Problems

Bateman87

Member
B
Join Date
Jun 2013
Location
New Hampshire
Posts
14
Morning all. I am currently using a FP-Sigma PLC from Panasonic. The first time I have ever used a Sigma before and I am running into an issue I have never seen before.

I was working on the program yesterday and entered in values in all my DDT areas and other places that needed to have values. When I connected to the PLC this morning, all the values I had entered yesterday are now completely different and showing values like 70_846_3045 or they go into the negative numbers while showing the same long amount of digits.

Does anyone know why this is happening and how it is I fix the issue?
I am talking with a Panasonic GT32-R if that info is needed.

Thanks
 

Similar Topics

A
Panasonic FPΣ (FP Sigma) read from PLC in FP Winpro software
I have a Panasonic FPΣ PLC that has register values that have changed, how do you read them and update your program. If you try to upload the...
Replies
0
Views
2,788
apmcs1
A
E
Panasonic FP Sigma FPG C32T2H-A need help
Dear Sirs, Seek favor. I have a problem with Panasonic FP Sigma FPG C32T2H-A with error message self diagnostic error. E45. Operation error ...
Replies
0
Views
2,762
elekomni
E
N
change of Panasonic FP Sigma PLC 12k to 32k
Dear All, We have been using FP Sigma 12K PLC for the last 7 years or more but unfortunately we had a malfunction on the unit and had to...
Replies
0
Views
3,949
nivedya
N
S
Panasonic FPsigma Password
We use Panasonic FPsigma PLC's on our equipment that we manufacture in house. The gentleman who was our programer has passed away unexpectedly and...
Replies
2
Views
1,692
icky812
icky812
M
address in panasonic plc sigma
Hello everybody. I write from Italy. I'm quite new here, because visit this site some years ago and now I'm register again now. Could somebody...
Replies
0
Views
1,735
maamprin
M
Back
Top Bottom