Panel Builder 32 Array Size

[C McAlpine]

When using Panel Builder 32 I am adding a tag and the array size seems to default to 0 on floats and integers.

I am wondering if this will cause me an issue I don't seem to be able to change it to 1 for the single tag but also doing some searching I have found quite a few posts and notes saying to leave it alone.

Thanks for your guys' help I've been a long time lurker here...

 

[OkiePC]

Yeah, It might depend on the PLC type that the PV is set up for, but I usually ignore the array size element in the PB32 tag database. I just opened up an old file (inherited from a system we support) and there is a mix of 1 and 0 for array size for floats, ints, and bits connected to SLC PLCs and they all work.

 

[C McAlpine]

Sounds like I will be okay. I am interfacing with an SLC5/03

Thank you.