testsubject
Member
I am having a discussion with an engineer and I say that the fuse should be mounted in a panel with the hinge on the bottom and he states that it does not matter since the fuse holders have a detent that holds it in place so the hinge can go on top.
I feel that I am right but cannot find any supporting documentation. UL508 has nothing that I could find.
If any of you have a document that describes how the fuse block should be mounted I would appreciate it.
I feel that I am right but cannot find any supporting documentation. UL508 has nothing that I could find.
If any of you have a document that describes how the fuse block should be mounted I would appreciate it.
Last edited: