I did see old threads, but nothing really came up as what I needed.
I'm trying to sort through compatibility here to get a panelview 1200e to show up in RSlinx.
Running Panelbuilder v5.15 in Windows XP, RSlinx 2.5
I have good serial communication to the end of my cable on pins 2 and 3. and i've tried putting a null modem on in case it was swapped around.
panelview settings are 9600, 8 bits, 1 stop, bcc.. standard settings.
Panelview is in configuration mode, and on the upload/download screen
the DF1 rs232 driver does not seem to be able to autoconnect, and the settings put in manually still show nothing.
99% sure i've got the right panelbuilder software, but i'm unsure if rslinx needs a different driver, or possibly a different configuration to get this to communicate right.
I'm trying to sort through compatibility here to get a panelview 1200e to show up in RSlinx.
Running Panelbuilder v5.15 in Windows XP, RSlinx 2.5
I have good serial communication to the end of my cable on pins 2 and 3. and i've tried putting a null modem on in case it was swapped around.
panelview settings are 9600, 8 bits, 1 stop, bcc.. standard settings.
Panelview is in configuration mode, and on the upload/download screen
the DF1 rs232 driver does not seem to be able to autoconnect, and the settings put in manually still show nothing.
99% sure i've got the right panelbuilder software, but i'm unsure if rslinx needs a different driver, or possibly a different configuration to get this to communicate right.